Header widget area left
Header widget area right

Rotor prototyping – how SLS 3D printing helps to fight the wildfires

Firefighters need high-quality equipment, they can depend on, especially on the eve of wildfire season. Fast and effective water flow is essential. Here’s the story of how 3D printing and Selective Laser Sintering technology helped redesign the water pump rotor three times faster than in the usual prototyping process.


It’s no secret that natural disasters can bring great damages. Especially dangerous ones like conflagrations or wildfires can cause injuries, burns, trauma or even death not only for human beings but also for the animals that live in forests. They can also lead to reducing the amount and deterioration of the quality of natural resources. Wildfire also generates costs. According to Forest Research Institute, direct losses per 1 ha of an area can cost up to $5000. Moreover, indirect (ecological) losses are estimated to reach even $25000.


Photo: Benjamin Kerensa

Rescue and Fire Fighting Units are often using floating pumps while coping with wildfire. They can also be used by individuals to pump significant amounts of water, as much as 1200 dm3 per minute. It is necessary to optimize pump’s operations, primarily by correlating its operating characteristics (like pressure and efficiency) with an engine operation (power, engine speed, etc.).

To cope with this optimization challenge it was essential to redesign the shape of the rotor blades of the pump. In the typical prototype process, constructors had to go through eight successive stages, which included both 2D documentation and the subsequent execution of the casting and its processing. Switching to the 3D printing helped to reduce the number of processes needed to only two, which are: implementation of the 3D model, and execution of the product (3d print) by omitting machining, polishing, as well as drilling and tapping holes, which significantly accelerates the production process of the element.


Printing parts on Sinterit Lisa 3D printer which operates in the SLS (Selective Laser Sintering) 3D printing technology helped to reach the goal. Printed element got the regular surface and thanks to isotropic properties of SLS powder as well as its mechanical parameters it was ideal to provide real-life tests and confirm the final shape of the pump.

Results implemented

In this case, the acceleration of the technological process of rotor production by 30 percent was  tremendous. Limiting the number of activities performed from 8 to 2 stages, assurance of the high precision of the print and no need of extra post-production processes, makes Sinterit Lisa an excellent choice for the pump producer. Not to mention that if the designed shaped needed to change, it would be fast and easy to make this change in 3D software.

  • Acceleration of the technological process of rotor production for the water pump,
  • Limiting the number of activities performed from 8 to 2 stages,
  • Object printed in high accuracy,
  • No need to use a foundry model taking into account the shrinkage, form and casting devices, equipment for processing the product and quality control,
  • Ability to quickly make changes and receive prototypes.
Skip to content