Header widget area left
Header widget area right

Printing accurate and durable phantom to mimic human organs

high spatial resolution well-suited for the delicate structures of phantoms
freely printing in space without having to support overhangs
improved print quality and reliability over the previously used FDM

Background

The Institute for Multiscale Simulation (MSS) was established in 2009 and, as a part of the Department of Chemical and Biological Engineering (CBI) of the FAU, contributes to the teaching and research programs of the Department. It complements the CBI in the vital field of multiscale numerical simulation techniques – the main research focus of the institute.

Another focal point is experimental research on the dynamics of granulates. Around one hundred students learn different 3D printing processes every year in Dr. Patric Müller’s courses. This knowledge is practically consolidated in an internship. Here, students can realize their own ideas. Research projects are regularly financed through third-party funds or collaborations with the industry or the public sector. MSS has also conducted research collaborations with partners from medical imaging.

One research focus is on phantoms mimicking the appearance of a typical patient’s brain in certain medical imaging modalities, as described in the following.

Problem

Single-photon emission computed tomography (SPECT) is a nuclear medicine imaging modality that measures the distribution of a previously administered radioactive substance within a patient.

The measurement is imperfect due to physical limitations, especially regarding spatial resolution. Many research approaches aim at improving this, but ultimately every method needs to be validated, which is typically achieved with phantom measurements. Traditional phantoms featured simple geometries (e.g. spheres) and thus were only a limited representation for a patient acquisition. Consequently, patient mimicking phantoms representing the human brain were designed. The phantom’s geometry featured many overhangs requiring support structures. In the first approach, the phantom was printed based on fused-deposition-modelling (FDM) with dual extrusion. However, it was found that the spatial resolution of the print and the reliability of dual- extrusion were too low.

Solution

Because the Institute of Multiscale Simulation wanted to print freely in space without having to support overhangs, they opted for the SLS process. After researching the market, the solution was to purchase a Sinterit printer. Lisa PRO allows them to print accurate and durable phantoms mimicking human organs. Furthermore, the high spatial resolution was well suited for the delicate structures of such phantoms.

The SLS process improved print quality and reliability, over the previously used FDM approach and resulted in highly detailed prints. The human brain phantom was printed in two halves, so that the remaining powder could easily be removed from the non-visible areas. After that, the halves were glued together.

For the actual measurements, the phantom needs to be filled with a radioactive liquid. To make the filling possible, they coated the outer shell with an epoxy resin. To bypass the process of covering the printouts with resin, Walter Pucheanu will start printing from polypropylene, a powder that does not absorb liquids.

“The print quality of the Lisa PRO is impressive.”

Visit our customer’s website: http://www.mss.cbi.fau.de/

Friedrich Alexander Universität Erlangen-Nürnberg
Customer:
Walter Pucheanu, R&D Technician, Institute for Multiscale Simulation (Friedrich-Alexander-Universität Erlangen-Nürnberg)
Country:
Germany
Industry:
Research, Education
Application:
Healthcare / Medical
Uses:
Phantoms for computed tomography
Top reasons:
Accuracy, Complexity, Material Variety, Wall Thickness, Water Tightness

high spatial resolution well-suited for the delicate structures of phantoms
freely printing in space without having to support overhangs
improved print quality and reliability over the previously used FDM

Equipment used by Friedrich Alexander Universität Erlangen-Nürnberg : Sinterit LISA PRO 3D Printer
Material used: PA12

    Subscribe to the newsletter

    And stay informed about new publications and videos


    Skip to content