Dedicated Powder Tools

Dedicated to SLS postprocessing

Essential tool kit for working with powder

Talk to an Expert

CHECK OUR PRINTER SETS

No mess, no waste

New powder tools cover the entire printing process

We’ve designed our new powder tools to keep the powder where it should be, and nowhere else.

Helps you save powder. Like having a “cartridge” experience but with all the benefits and elasticity of independent powder management.

It’s never been so easy to recover all of your powder, free of dust and dirt.

A dedicated, foldable workspace makes it effortless: easy to clean, easy to store, and super easy to use.

Powder tools work hand-in-hand with the Sinterit SLS 3D printing ecosystem.

Helps you work smarter and faster. Just take your powder bucket, attach the powder funnel to it and put the powder in the printer. After printing and post-processing, clean the workspace using the ATEX vacuum cleaner and put the remaining powder back in the same powder bucket.

Watch webinar

How to optimize 3D printing costs through powder management

Watch webinar

Watch the video

Dedicated Powder Tools

Trunk bag, Cleaning wipes, Silicone oil 50ml, Cotton cloth, Protective Glasses, Protective Dust Mask, Protective Gloves. T-shirt. Scrapers. Scoop. Brush 40 mm, Measuring cup, Paper tube, Large brushes, Small brushes, Stainless steel probe, Metal spatula, Metal strainer, Binder.

Powder funnel

Simple is often best. We have tested countless powder-in systems, and we are convinced Sinterit’s Powder Funnel will give you the best results and versatility. It allows you to fill the printer without spraying powder in the air. We’re also thrilled to announce that Powder Funnel is compatible with both Sinterit’s new powder container, Sinterit Sieve, and Powder Separator in the ATEX Vacuum Cleaner.

Trowel

Sinterit Trowel isn’t a new device, but we’ve redesigned it to fit the whole feed bed. Done in just one move, the tamping process is now faster. It also ensures uniform pressure distribution and proper powder density.

Trowel & IO Box

The IO box was initially designed to take out ready printouts. Now it has one more function: When you turn one of the parts upside down, it can be used as a guide for putting powder in the printer. Fitting the bed perfectly, it secures the pyrometers and mechanical elements, allowing the powder to fall only into the feed bed – and nowhere else.

Foldable Tray

Foldable and light, the tray is easy to store. When unfolded, it creates an optimal workspace for initial post-processing. Most SLS 3D printing users don’t have dedicated, portable working space for “dirty work” that is easy to bend and then clean. The foldable Tray is a perfect solution. It’s easy to vacuum or pour powder out of and into a bucket. PLEASE NOTE – Foldable tray is sell separaterly.

Supply Kit

The attached service kit with all maintenance parts will keep your printer working for 400 hours. The spare recoater cords, silicone oil, set of clean wipes, cotton cloths, and spare heater supplies will have you prepared for any and all standard maintenance jobs.

Daniel Aarts

Technical Director at Innoseal Europe

Sinterit’s Lisa X has allowed us to reduce lead-times and create better solutions — faster, helping us satisfy our customers. We have looked at other 3D printing methods, and other brands, but ultimately decided on SLS and chose Sinterit for their communication, and open material possibility. Something we couldn’t find in other suppliers of affordable entry level SLS printers.

Innoseal case study with Sinterit LISA X

Alberto Parolin

R&D Team Leader in BNP

Getting Lisa X solved a lot of our problems. It has a big enough printing area, so we almost always can print big components in one part. It wouldn’t be possible with competitive SLS 3D printing solutions.

See case study

Philippe Bendel

Additive Manufacturing Development Leader – Somfy

The main reason Somfy reached out for the SLS technology from Sinterit was productivity. Printing many pieces in one batch was a game-changer

SEE CASE STUDY

Alec Bialek

Head of Jetson’s R&D

When we look at Lisa’s line of printers, or Sinterit at general compared to other companies, the two major things that we liked were the materials, that are open source, so we are not locked into one brand […]. We are able to look around the market and use a material that works best for the part.

SEE CASE STUDY

Your concerns may include costs, ROI, customer support, print quality, or printing speed. We have helped thousands of companies make the right choice.

The Administrator of your personal data is Sinterit Sp. z o.o. with its registered seat in Krakow, ul. Nad Drwina 10 bud. B3, 30-741 Krakow, entered in the register of entrepreneurs kept by the District Court for Krakow - Śródmieście in Kraków, XI Economic Division of the National Court Register under KRS number: 0000535095, tax identification number (NIP): 6793106416. Your personal data will be processed solely for the purpose of providing you with an answer to the enquiry sent via the contact form. The legal basis for the processing is your freely given consent (Article 6(1)(a) of the RODO/GDPR), which is necessary to fulfil the indicated purpose. Your data will be stored for the period necessary to respond or until you withdraw your consent. You may withdraw your given consent to the processing of your personal data at any time, which does not affect the lawfulness of the processing carried out on the basis of your consent before its withdrawal. In addition, you have the right to access, rectify, transfer, erase or restrict the processing of your data and to object to the processing. Detailed information regarding the processing of your personal data is contained in our Privacy Policy (click here).

Pricing

Below there are approximate costs for some example models.

Be aware that the quotation assumes that there is only one piece printed. In SLS technology, the cost per part will be much lower with a higher number of elements printed at once.

Flexible
Standard

Model

Dimensions

PA12
Smooth

PA11
Onyx

Flexa
Grey

Flexa
Soft

TPE

Below

Model volume:

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

51,30 €

Crank

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

49,90 €

Derailleur

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

71,80 €

Driller housing

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

157 €

Model

Dimensions

PA12
Smooth

PA11
Onyx

Flexa
Grey

Flexa
Soft

TPE

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Get a free sample box

Universal joint + turbine

The free samplebox contains two printouts made from PA12 Smooth. They are both movable designs, and each one is printed in one piece.

These are examples showing high precision and freedom of design ensured by SLS technology.

order free sample box

Mamy też advanced samples orci varius natoque penatibus et magnis dis parturient montes, nascetur
ridiculus mus. Aliquam id placerat nunc. Integer viverra, arcu vel feugiat viverra, dui purus sodales libero.

SEE ADVANCED samples

Dedicated Powder Tools

Dedicated to SLS postprocessing

Dedicated Powder Tools

No mess, no waste

Less waste

Cleaner workspace

Better workflow

Watch webinar

How to optimize 3D printing costs through powder management

Dedicated Powder Tools

Trunk bag, Cleaning wipes, Silicone oil 50ml, Cotton cloth, Protective Glasses, Protective Dust Mask, Protective Gloves. T-shirt. Scrapers. Scoop. Brush 40 mm, Measuring cup, Paper tube, Large brushes, Small brushes, Stainless steel probe, Metal spatula, Metal strainer, Binder.

Powder funnel

Trowel

Sinterit Trowel isn’t a new device, but we’ve redesigned it to fit the whole feed bed. Done in just one move, the tamping process is now faster. It also ensures uniform pressure distribution and proper powder density.

Trowel & IO Box

Foldable Tray

Supply Kit

The attached service kit with all maintenance parts will keep your printer working for 400 hours. The spare recoater cords, silicone oil, set of clean wipes, cotton cloths, and spare heater supplies will have you prepared for any and all standard maintenance jobs.

Daniel Aarts

Technical Director at Innoseal Europe

Alberto Parolin

R&D Team Leader in BNP

Philippe Bendel

Additive Manufacturing Development Leader – Somfy

Alec Bialek

Head of Jetson’s R&D

Overcome Your Challenge with the Right 3D Printer

Discover Case Studies

SLS 3D Printers

Software

Service Plans

Peripherals

Materials

Explore more

Learn

Customers zone

Company

US Store

Pricing

Get a free sample box

Dedicated Powder Tools

Dedicated to SLS postprocessing

Dedicated Powder Tools

No mess, no waste

Less waste

Cleaner workspace

Better workflow

Watch webinar

How to optimize 3D printing costs through powder management

Dedicated Powder Tools

Trunk bag, Cleaning wipes, Silicone oil 50ml, Cotton cloth, Protective Glasses, Protective Dust Mask, Protective Gloves. T-shirt. Scrapers. Scoop. Brush 40 mm, Measuring cup, Paper tube, Large brushes, Small brushes, Stainless steel probe, Metal spatula, Metal strainer, Binder.

Powder funnel

Trowel

Sinterit Trowel isn’t a new device, but we’ve redesigned it to fit the whole feed bed. Done in just one move, the tamping process is now faster. It also ensures uniform pressure distribution and proper powder density.

Trowel & IO Box

Foldable Tray

Supply Kit

The attached service kit with all maintenance parts will keep your printer working for 400 hours. The spare recoater cords, silicone oil, set of clean wipes, cotton cloths, and spare heater supplies will have you prepared for any and all standard maintenance jobs.

Daniel Aarts

Technical Director at Innoseal Europe

Alberto Parolin

R&D Team Leader in BNP

Philippe Bendel

Additive Manufacturing Development Leader – Somfy

Alec Bialek

Head of Jetson’s R&D

Overcome Your Challenge with the Right 3D Printer

Discover Case Studies

Want to solve your project challenge ?

Download the checklist that will save your time and simplify the decision-making process when choosing a 3D printer for your project.

Pricing

Get a free sample box

Download the checklist that will save your time and simplify the
decision-making process when choosing a 3D printer for your project.